For a video on how to unlock any Blackberry click here.
For a video on how to unlock a Blackberry Storm 2 9550 click here.
For a video on how to unlock a Blackberry Torch 9800 click here.
For a video on how to unlock any HTC phone click here.
For a video on how to unlock any Motorla phone click here.
For a video on how to Sign up for a Mytouch Google account click here.

Blackberry

If you have 0 Attempts Remaining when trying to enter the code, it means that your phone has already been hardlocked and cannot be unlocked by code. Even if you correctly enter the code, phone will still say "Code Error, Please Wait...".

How to Enter Unlock Codes on BlackBerry Bold (9000), 8800, 8820, Curve (8300, 8310, 8320), Javelin (8900), Gemini (8520, 9300), & Onyx (9700) Bold 2, 9780, 9650, 9100 Pearl:

Note: NO SIM is needed to unlock the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: MEP2, if nothing comes up then try typing MEP4 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!

How to Enter Unlock Codes on BlackBerry Pearl (8100, 8110, 8120, 8220):

Note: Remove any SIM that is currently in the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT (Left side Below @) and press: mepp2 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!

How to Enter Unlock Codes on BlackBerry 8830:

Note: SIM is REQUIRED to unlock the phone. SIM card can be inactive, doesn't need to active. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

No AT&T/T-mobile Usage: This is a dual-band phone, it will NOT work in North America but will work fine in Europe, Asia, South America where they use the other set of frequencies.

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!
Exception: If phone says Code Error and the attempts stay the same, start off with 10 attempts and still says 10 attempts after enter code, then continue with instructions, this is just a glitch on the phone.

How to Enter Unlock Codes on BlackBerry 8700/8700c/8700g:

Note: SIM is REQUIRED to unlock the phone. SIM card can be inactive, doesn't need to active. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mepe (Please note that you will NOT see what you type on the screen)
6) It will ask you for the unlock code. Enter it and then press jog dial to confirm and your phone is unlocked!

How to Enter Unlock Codes on BlackBerry 7105t:

Note: SIM is REQUIRED to unlock the phone. SIM card can be inactive, doesn't need to active. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1) Power phone on and turn off the radio (Turn Wireless Off option)
2) Go to Tools
3) Go to Settings
4) Go to Options and select Advanced Options
5) Go to SIM Card
6) Type "MEPPD" (please note that you will not see what you type on the screen)
7) HOLD ALT and press mepp2
8) Enter the Unlock Code
9) Press enter (press on Trackball)
10) Reboot device. Device is now unlocked

How to Enter Unlock Codes on BlackBerry 7100/7130/7130c:

Note: Remove any SIM that is currently in the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT (Left side Below @) and press: mepp2 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!

How to Enter Unlock Codes on Blackberry 5xxx, 6xxx, 7xxx (Except for 7100):

Note: After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
1) Power on
2) Go to Options.
3) Scroll to SIM CARD then press jog dial in once to select it
4) HOLD ALT (Half moon key on the lower left side) and press: mepe (Please note that you will NOT see what you type on the screen)
5) It will ask you for the unlock code. Enter it and then press jog dial once to confirm and your phone is unlocked!

How to Enter Unlock Codes on Blackberry Vodafone Storm (9500):

1) Turn off the phone
2) Need a SIM card inserted into the phone (Example: Verizon, At&t, T-mobile)
3) Turn on the phone
4) Go to Settings (Button that has dots next to green call button), Click on Manage Connections, Select 'Turn All Connections Off'
5) Press End Call (Red button)
6) Go to Settings, then Options, then Advanced Options, then SIM Card 7) Hit the Settings Button (Button that has dots next to green call button) and select 'Show Keyboard'
8) Type in mepd (Please note that you will NOT see what you type on the screen)
9) Type in mep2 or mepp2 and another screen will pop-up prompting for the MEP code (Please note that you will NOT see what you type on the screen)
10) Enter the code, Remember you ONLY have 10 chances to get it right
11) Press enter and your phone is unlocked!

How to Enter Unlock Codes on BlackBerry Storm (9530, 9550, Storm 2):

1) Turn off the phone
2) Need a SIM card inserted into the phone (Example: Verizon, At&t, T-mobile)
3) Turn on the phone
4) Go to Settings (Button that has dots next to green call button), Click on Manage Connections, Select 'Turn All Connections Off'
5) Press End Call (Red button)
6) Inside Settings menu, Click Options, then Mobile Network, on the switch technology to 'Global' if that has not been done.
Exception: If phone prompts 'Would you like your Blackberry to automatically select CDMA or GSM based on network availability', select No.
7) Now click the Back Arrow Button (Next to the Red End Call button) and select Advanced Options and then SIM Card
8) Hit the Settings Button (Button that has dots next to green call button) and select 'Show Keyboard'
9) Type in mep2 or mepp2 and another screen will pop-up prompting for the MEP code (Please note that you will NOT see what you type on the screen)
Exception: If nothing is prompting up and you are making sure you are selecting each button by press the screen in, do a wipe handheld to reset the phone to manufacturer default: http://forums.crackberry.com/showthread.php?t=110075
10) Enter the code, Remember you ONLY have 10 chances to get it right
Exception: If phone says Code Error and the attempts stay the same, start off with 10 attempts and still says 10 attempts after enter code, then continue with instructions, this is a glitch on the phone
11) Press the Enter key (Button that looks like a backwards L arrow)
12) A message will appear saying Code Accepted
13) Turn device off by removing battery, insert SIM of your choice if have not done so already. Turning device is necessary even if you have SIM of choice inserted.
14) Turn the phone back on
15) Go to Settings, then Options, then Mobile Network, on the third row switch Network Technology to GSM/UMTS.
16) Press the Back Arrow Button to exit and save settings.
17) Return to the main screen by pressing End Call and you should see your phone getting signal
18) As a reminder, if you ever remove the SIM card from your phone, you will need to set the Network Technology as GSM/UMTS again

Issues:
1) If you have issues with the phone not recognizing the network, make sure the radio is on by making sure it is not low on power.
2) If you follow the above instructions and code is accepted with the Network Technology set to GSM/UMTS and still not working, it may be the SIM needs to be replaced with a newer SIM Card.

Removing "Activation Required" on the screen or changing the Phone Number:
1) On the main screen of the phone, press Call (Green Button)
2) Type on the screen: ##000000
3) Press the Call Button
4) For the Mobile Directory Number, put in your phone number in there
5) After you have done that, press the Menu Button to Save the options and the phone will automatically restart
6) After restarting, it will be updated

How to get the Browser to work on the Storm (Includes Service Books for email to function as well):

1) At&t Browser Fix - Fix
2) T-mobile Browser Fix - Fix

How to Enter Unlock Codes on BlackBerry Tour (9630):

1) Turn off the phone
2) Need a SIM card inserted into the phone (Example: Verizon, At&t, T-mobile)
3) Turn on the phone
4) Go to Settings
5) Go to Options
6) Go to Advanced Options
7) Go to Sim Card
8) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen)
9) Enter the code, Remember you ONLY have 10 chances to get it right
10) Enter it and then press trackball to confirm and your phone is unlocked!
11) A message will appear saying Code Accepted
12) Turn device off by removing battery, insert SIM of your choice if have not done so already. Turning device is necessary even if you have SIM of choice inserted.
13) Turn the phone back on
14) Go to Settings, then Manage Connections, then Mobile Network Options and set the Network Technology to GSM/UMTS.
15) Set Network Mode to 3G & 2G.
16) Press the Back Arrow Button once to exit and save settings.
17) Inside the Manage Connections, set Mobile Network to on.
18) Return to the main screen by pressing End Call and you should see your phone getting signal
19) As a reminder, if you ever remove the SIM card from your phone, you will need to set the Network Technology as GSM/UMTS again

Issues:
1) If you have issues with the phone not recognizing the network, make sure the radio is on by making sure it is not low on power.
2) If you follow the above instructions and code is accepted with the Network Technology set to GSM/UMTS and still not working, it may be the SIM needs to be replaced with a newer SIM Card.

VERIZON TOURS ONLY: Removing "Activation Required" on the screen or changing the Phone Number:
1) On the main screen of the phone, press Call (Green Button)
2) Type on the screen: ##000000
3) Press the Call Button
4) For the Mobile Directory Number, put in your phone number in there
5) After you have done that, press the Menu Button to Save the options and the phone will automatically restart
6) After restarting, it will be updated

SPRINT TOURS: If you need to remove the Activation Required, you will need to get the MSL code to remove it. Contact us for costs.

How to get the Emails to work on the Storm (Includes Service Books for email to function):

1) At&t Browser Fix - Fix
2) T-mobile Browser Fix - Fix

How to Enter MSL Code on Sprint BlackBerry:

1) From the mainscreen of the BlackBerry, press the green call button to enter the phone
2) Type in ##MSLCODE then the green talk button (ie: ##123456 Green talk button)
3) In the CDMA service edit screen, delete the number in the first row (000000xxxx) and replace it with your current phone number
4) Press the menu key and choose save
5) The device will re-boot
6) When the device re-boots, Activation Required will be gone and the active carrier name will now appear
How to Enter Unlock Codes on BlackBerry Torch 9800:
Note: NO SIM is needed to unlock the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1) Power the phone on
2) Go to Options
3) Go to Device
4) Go to Advanced system Settings
5) Go to Sim Card
6) Type on the keybord: MEPD
7) HOLD ALT and type: mep2 (Please note that you will NOT see what you type on the screen)
8) It will ask you for the unlock code. Enter it and then press trackpad to confirm and your phone is unlocked!

Samsung

If you received two unlock codes the first one is Unfreeze code (MCK). The second code is Network Unlock Code (NCK). If you received only one code from us it's a Network Unlock Code (NCK).
If you received four unlock codes then: Network Code (NCK), Unfreeze Code (MCK), Subset Code (SCK), Service Provider Code (SPCK).

Models: A117, A137, A167, A177, A237, A257 (Magnet), A436, A437, A517, A637, A657, A707, A717, A727, A737, A747 (SLM), A757, A767 (Propel), A777, A787, A817, A827 (Access), A837 (Rugby), A867 (Eternity), A877 (Impression), A887 (Sostice), C417, i907 (Epix), X497, ZX10, ZX20, T219, T229, T239, T309, T319, T339, T429, T459 (Gravity), T469 (Gravity 2), T609, T639, T729 (Blast), T739, T749 (Highlight), T819, T919 (Behold), T929 (Memoir)

1) Power on without SIM card
2) Compose: #7465625*638*CODE# (by "CODE" I mean the unlock code I gave you)

Not Yet Personalized - If you see this message, it is another way of saying the phone is already unlocked.

How to remove Phone freeze

A frequent reason for Freeze Code to be enabled is when user enters several erroneous NCK codes.

If your cell phone shows a "Phone Freeze" message use the first code to unfreeze it. Enter the 8-digit code with SIM card in the phone when the "Phone Freeze" message is displayed, then press OK button (middle buttom, depending on phone branding can be called differently).
You will not see text appear on screen while typing.

You can now proceede to entering Network Unlock Code.

How To Fix Samsung A737 Phone Freeze:* 91906175 + OK. Enter the code WITH simcard inside the phone when "Phone Freeze" warning is displayed (no entered digits will be displayed).

How to enter Network Unlock Code

Samsung Z510, Z650, Z320i

Power on without SIM card
Type in **CODE# where CODE is the unlock code you received from us.

Samsung SGH-A257 Magnet

Power on without SIM
Type in #7465625*638*Unlock code# (8 digit unlock code*)
Device should say: “Network Lock Deactivated”
Phone may automatically reboot

Samsung Z105 and Z107

Power on with a non accepted SIM card
Type in #7465625*638*CODE# (or *#7465625*638*CODE#) where CODE is the unlock code you received from us.
Press the SEND key, display should read, "Personalization Cancelled"

Samsung 3G series, D, Z-series, some A-, C-, E-, T-, X-series, other models

Power on without SIM card
Type in #7465625*638*CODE# (or *#7465625*638*CODE#) where CODE is the unlock code you received from us.
Press the SEND key, display should read, "Personalization Cancelled"

Samsung i616 Jack or Blackjack2 from Fido Canada

1. Power ON your phone with a FIDO SIM Card that the phone is locked to
2. Type #7465625*638*
3. Network Lock Screen appear, enter UNLOCK CODE
4. Device is now unlocked

Samsung A886

   1. Insert a not accepted SIM Card and turn ON your Samsung A886 Forever.

   2. Phone will ask for a "Password".

   3. Enter the Unlock CODE you received from Us.

Note: In some instances the Samsung A886 won't ask for "Password" - enter the unlock code anyway.

OR if phone shows "Insert Correct SIM card"

   1. Insert a not accepted SIM Card and turn ON your Samsung A886.

   2. Type in #0111*CODE# where CODE is the Unlock CODE you received from Us.

   3. Press the SEND key, display should read, "Personalization Cancelled".

   4. Your Samsung A886 is now unlocked!

Other Samsung models

Power on without SIM card
Phone will ask for "Password"
Enter the unlock code you received from us.

Note: In some instances the phone won't ask for "Password" - enter the unlock code anyway
OR if phone shows "Insert Correct SIM card"

Power on with a non accepted SIM card
Type in #0111*CODE# where CODE is the unlock code you received from us.
Press the SEND key, display should read, "Personalization Cancelled"

i607 Blackjack
Power on with incorrect (non accepted) SIM card, when asked to enter network pin enter provided unlock code.
No need to hold other keys while entering code
If you are unable to connect to the service provider or unable to make out-going calls or receive messages, this has nothing to do with your phone being locked. You need to force the Blackjack to change to GSM mode:

Power on the phone
Enter *#1546792*#
Select Option 3 Network & Call Settings
Select Option 5 Network Mode
Select GSM

How to Enter Unlock Codes on a BlackJack (i607/i617) or Jack i637

1) Power on with Incorrect SIM
2) Phone will prompt for Network Pin
3) Use Code provided and press OK

ERROR MESSAGE: WRONG PASSWORD or INVALID CODE - If you receive one of these messages when entering the code for the Blackjack, the phone is likely to be refurbished. In cases like these, unlocking of the phone by code cannot be done, only by machine. Many cell phone shops do carry hardware devices (NsPro Box) to remove the unlock from the phones.

NOTE: If you are unable to connect to service provider or unable to make out going calls or recieve messages, this has nothing to do with your phone being locked or not, you need to force the BlackJack to change to GSM mode, this can be done as follows:
1) Power on your Phone
2) Enter *#1546792*#
3) Select Option 3 Network & Call Settings
4) Select option 5 Network Mode
5) Select GSM

Quickfire

Power off device and remove AT&T SIM card
Insert SIM Card from another wireless carrier
Power on the handset
With the device in Portrait mode, tap the phone icon
Dial *#865625# to enter the unlock code menu
Display now says "TO UNLOCK SIM ENTER UNLOCK CODE CORRECTLY. FIVE (5) TIMES WILL RESULT IN THE PERMANENT LOCK OF YOUR PHONE CONTINUE?"
Enter the 15-digit code given to you by, then tap DONE. If you entered an incorrect code, you will see the following message: "INCORRECT LOCK CODE" "INCORRECT UNLOCK CODE TRY AGAIN"
If the code is correct, tap on DONE. The handset is now successfully unlocked

HP iPAQ iPAQ 6320, 6325, 6510, 6515

Power on phone with a non-original SIM card inserted
Wait approximately 30 seconds until the SimLock application appears (the delay may be longer if the user has previously attempted to unlock with the wrong code)
Enter your unlock code when prompted by the phone
Press OK
If the unlock code is correct, a success dialog will appear. Press OK

If the unlock code is incorrect, an error dialog will appear. After pressing OK, the user has to re-enter the unlock code after a delay (see above in Device Specific Information)

iPAQ 6315

On the Today screen, tap Start > Settings
Tap the Phone band icon and choose " North America" or "Europe" or "Asia" phone band depending on where you are
Tap the keyboard icon to open the virtual keyboard
Tap Shift and then Ctl key to enable the keys
Tap the blank area below the band selection box to open the unlock tool
Tap Shift and then Ctl to disable the keys
Enter the unlock code you received from us, and tap OK when done
Wait for the device to validate the unlock code (about five seconds). You will see one of the following screens:
"Unlock successful"
The device is now unlocked and should continue booting.

"Unlock failed due to incorrect code"
The user has three attempts to unlock. After three attempts, the device will refuse any more unlocking attempts. Perform a soft reset to reset the counter to perform additional unlocking attempts.

"Your phone is not ready for unlocking"
This error message displays when the user tries to unlock when the phone application (not the device) is not in a steady state. It takes 30 seconds after powering on the phone for it to reach a steady state.

Palm One

Treo 650, 680

Power on phone with a non-original SIM card inserted
Turn wireless off
It will then say "Your phone cannot be used with this SIM card" ("SIM not allowed" in case of Treo 650). Click OK
Click dialpad tab, bottom of the screen far left
Using stylus enter *#*#unlock code# and press the green button
It will say "The sim lock has been removed from your phone"
Your phone is unlocked

Treo 750

Power on phone with a non-original SIM card inserted
Turn wireless off
Using onscreen keyboard enter the supplied unlock code
Your phone is unlocked

Sony Ericsson

All models

Power on your phone without SIM card or with Original one
Press joystick left once
Press * twice
Press joystick left once
Phone will say "Personalize with MNC2" or "Personalized with MNC3"
Wait approximately 5 seconds
The display will indicate "Network" and a picture of a closed padlock
Press Select
The display will indicate "Unlock (Net) 5" and "NCK:"
You can now enter the supplied unlock code
Phone will display "Network unlocked" and then "Insert SIM" message
Your phone is unlocked

If your phone has a jogdial press it down instead of joystick left.

LG

Model : LG Incite CT-810 and IP-540x

Insert a SIM from the original network
2945#*810# will show the unlock menu
Enter unlock code

Model : LG KP265

Use Original SIM to switch ON the Phone.
Compose 2945#*265#
Then go to MENU > SETTINGS > SECURITY
Then go to SIM LOCKS > NETWORK > DESACTIVATE
ENTER NCK (your Unlock Code)

Model : LG ME550

Use Original SIM to switch ON the Phone.
Compose 2945#*71101#.
Menu will appear, go to settings > security > sim lock
Enter NCK ( Unlock Code ) and press OK.

Model : LG TU915

Switch ON your phone with an allowed SIM Card
Then compose: 2945#*9701#
It should you ask you for the code.

OR

Enter *#865625# then enter your 16 digits code.

Model : LG KF390 and KF390q

Insert a SIM Card from the network the mobile is locked to and turn it on
Insert the following sequence *#865625#;
Select 'Unlock USIM'
Select 'Network Lock'
Insert the unlock code
Select ok. Done!

Model : LG Prada, KE850 :

Switch the telephone on with Original SIM card inside.
Enter SIM pin if required.
Enter 2945#*8501# and press the call button (middle button bottom of the screen).
SIM unlock mode will appear on screen.
Enter unlock code
Select Reboot.
Switch phone off, and then turn back on again. Phone is now unlocked

Model : LG CT810

insert original sim card and turn phone on.
Enter 2945#*810#
A menu will pop up, select sim unlock
Enter your unlock code and press ok
The phone will then reboot and the unlock is complete.

Model : LG VU CU915 & CU920

Put a AT&T or Cingular SIM in the phone; it does not have to be an active SIM
Enter *#865625# then the 16 digit unlock code
Device should say: Network Lock Deactivated
Phone may automatically reboot and is now unlocked !

Model : LG U310

Turn ON the phone without SIM Card :
Enter 815118#*#
Sim unlock mode pop up .
Enter your unlock code and press ok
The phone will then reboot and the unlock is complete.

Model : LG KC550, KS360, KP230, KP500, KP501, KP502, KP270

Insert original sim card and turn phone on.
Enter 2945#*71001#
Sim unlock mode pop up .
Enter your unlock code and press ok
The phone will then reboot and the unlock is complete.

Model : LG KF700 (aka LG Virgo)

insert original sim card and turn phone on.
Enter 2945#*700#
A menu will pop up, select sim unlock
Enter your unlock code and press ok
The phone will then reboot and the unlock is complete.

Model : LG KC910, KF910 (aka LG Prada)

insert original sim card and turn phone on.
Enter 2945#*910#
A menu will pop up, select sim unlock
Enter your unlock code and press ok
The phone will then reboot and the unlock is complete.

Model: LG BL40

Insert an original sim card.
Compose 2945#*40#
Enter your unlock code and press ok.
Your phone is unlocked.

LG GS505 Sentio
1. Turn on your LG GS505 Sentio with original SIM card
2. Enter 2945#*505#
3. A menu will pop up, select SIM unlock
4. Enter your unlock code and press OK
5. The phone will then reboot and your LG GS505 Sentio is unlocked!

Model : LG GW520

     1. power phone ON with original SIM
     2. type 2945#*71001# to enter unlock menu
     3. Enter the unlocking code

Model : LG KF750

insert original sim card and turn phone on.
Enter 2945#*750#
A menu will pop up, select sim unlock
Enter your unlock code and press ok
The phone will then reboot and the unlock is complete.

Model : LG KF600

Insert original sim card and turn phone on.
Enter 2945#*71001#
Sim unlock mode pop up .
Enter your unlock code and press ok
The phone will then reboot and the unlock is complete.

Model : LG U970

Insert original sim card and turn phone on.
Enter 2945#*970#
A menu will pop up, select Unlock Usim.
Select Network Lock.
Enter the unlock code and ok.

Model : LG U300

Switch ON the phone with Accepted SIM Card (from Original Network Provider)
Enter Code : 815118#*#
then phone will ask to enter NCK

Model : LG C2000:

Insert non-Cingular SIM card
Power on the handset - phone will display "phone restricted"
Select "Cancel" - phone will display "phone restriction code"
Enter the SIM Unlock code.
Select "OK" - the handset is now successfully unlocked

Model : LG KU990 Viewty & KE990

Insert original sim card and turn phone on.
Press telephone icon at bottom of screen to bring up the phone keypad
Enter 2945#*990#
A menu will pop up, select sim unlock
Enter your unlock code and press ok
The phone will then reboot and the unlock is complete.

Model : LG TU720 - LG CU720 and all LG Shine SERIES

Power ON your phone with an accepted SIM card
Type *#865625#UNLOCK CODE
Press OK
Device is now unlocked

Model : LG CE110, CF360, CG180, CG225, C1300, C1300i, C1500):

Put a non AT&T or Cingular SIM in the phone;
The phone display: Invalid Smart Chip
Power on handset
Select "Cancel" - phone displays "phone restriction code"
Enter the unlock code (8 digit code*)
Select "OK’" - the handset is successfully unlocked

Please Note: If having issues unlocking the CF360, use the instructions listed for the LG GR500 (Xenon)

Model : LG CU400 & CU500v

Insert SIM Card from a unsupported network provider,
Power on the handset,
Phone will display "Invalid SmartChip"
In Idle screen, enter : 159753#*#
Phone will display "Enter NCK, Remaining 5"
Enter the 8 digit SIM Unlock code
Select "OK"
The handset is now successfully unlocked

Model : LG U8150

Switch ON your phone with a NOT Allowed SIM Card,
Compose : 2, 7, 7, 6, 3, 4, #, *, #,
Go to menu "SIM Lock",
Enter the Unlock Code we send to you.

Model : LG U400

Insert the network SIM in the handset which has given u the LG U400.
Enter 2945#*88110#.
The phone will then prompt 'Unlock sim'. Press OK.
The phone will then prompt 'Network Unlock'. Press OK.
The phone will then prompt- 'Input Network Control Key'.

Enter the 8 digit unlocking code. Press OK. If the unlocking code comes with only 7 digits, add a 0 in front of the 7 digit code. If the unlocking code comes with only 6 digits, add 00 in front of the 6 digit code.

It should give you the message Success.
Come back to the main screen and Enter 2945#*88110#.
The phone will then prompt unlock sim. Press OK.
The phone will then prompt Network Unlock/ Lock but if you scroll down you will see a message Enter SP Lock. Enter SP Code.
Then press OK

How to Enter Unlock Code on LG GR500 (Xenon) or GT365 (Neon):

1) Turn on the phone to the main screen (no SIM needed)
2) Dial this into the LG Incite's phone menu
3) *#865625#
4) Press CALL.
5) It should you ask you for the code.

LG GS170

1. Turn on your LG GS170 with original SIM card
2. Enter 2945#*710#
3. A menu will pop up, select SIM unlock
4. Enter your unlock code and press OK
5. The phone will then reboot and your LG GS170 is unlocked!

LG GT540 Swift

Insert a not accepted SIM Card and turn ON your LG GT540 Swift.
Your LG GT540 Swift will display "phone restricted".
Select Cancel
Your LG GT540 Swift will display "phone restriction code".
Enter the Unlock CODE you received from us.
Select OK
Your LG GT540 Swift is now unlocked!

LG CU515:

Insert non AT&T SIM
Turn on the phone
Phone says invalid smart chip
Enter *#865625#
Yes to Unlock
Enter your 16 digit unlock code.

LG P509:
1. Power ON your phone with not allowed sim card.
2. Type 2945#*509# or *2945#509# or *2945#*509#
3. the phone will ask you to input the unlock code twice, just input the unlock code
4. Device is now unlocked

LG MG320:

1 - Switch ON your LG MG320 BLACKSLIM with a NOT ACCEPTED* SIM Card,
2 - Enter the Unlock Code.

Model : All other model

Switch ON your phone with an Allowed SIM Card,

Then compose :

2945#*5101# - (if you have a LG 510w)
1945#*5101# - (if you have a LG 1200 & B1200)
2945#*5221# - (if you have a LG 5200 & 52200)
2945#*5301# - (if you have a LG 5300)
2945#*5401# - (if you have a LG 5400)
2945#*70001# - (if you have a LG 7020)
2945#*7101# - (if you have a LG 7100)
2945#*1201# or 2945#*70001# - (if you have a LG 1100)
2945#*70001# - (if you have a LG7250T)
2945#*2201# - (if you have a LG C2200)
2945#*5301# - (if you have a LG T5100)
2945#*3311# - (if you have a LG C3310)

Go to "Menu" and then to "Settings",
Then select "Security",
To finish select "Network Provider" and select "Desactivate"
Enter the Unlock Code we send to you.

Model : To Classify

For the next models u must to insert the original SIM:

LG C3100 press 2945#*3101#
LG C3380 press 2945#*7101#
LG F2300 press 2945#*7101#
LG KE260 press 2945#*2601#
LG KE970 press 2945#*9701#
LG KG120 press 2945#*1201#
LG KG220 press 2945#*1201#
LG KG240 press 2945#*3311#
LG KG280 press 2945#*7101#
LG KG290 press 2945#*7101#
LG KG800 press 2945#*7101#
LG KU250 press 2945#*250#
LG KU380 press 2945#*380#

After that will appear an secret menu,go to settings-security- sim lock ,enter NCK and press OK.

For next models insert one SIM ,not the original SIM:
LG KU311 press 815118#*#
LG KU800 press 82652#*#
LG L600v press 815118#*#
LG U8150 press 277634#*#
LG U8210 press 277634#*#
LG U8500 press 277634#*#
LG U400 press 2945#*88110#
LG KC550 press 2945#*71001#
LG KU580 press 2945#*580#
LG KT520 press 2945#*520#
LG KF750 press 2945#*750#
LG KF600 press 2945#*71001#
LG KG275 press 2945#*20001#
LG KU380 press 2945#*380#
LG KU311 press 815118#*#
LG KU800 press 82652#*#
LG L600v press 815118#*#
LG U8150 press 277634#*#
LG U8210 press 277634#*#
LG U8500 press 277634#*#
LG C3100 press 2945#*3101#
LG C3380 press 2945#*7101#
LG F2300 press 2945#*7101#
LG KE260 press 2945#*2601#
LG KG120 press 2945#*1201#
LG KG220 press 2945#*1201#
LG KG240 press 2945#*3311#
LG KG280 press 2945#*7101#
LG KS500 press 2945#*500#
LG P500 press 2945#*500#
LG KP270 press 2945#*270#
LG KF240 press 2945#*240# or 2945#*2401#
LG KG290 press 2945#*7101#
LG KU250 press 2945#*250#
Enter NCK and press OK.

LG Neon

Insert a not accepted SIM Card and turn ON your LG Neon.
Your LG Neon will display "phone restricted".
Select Cancel
Your LG Neon will display "phone restriction code".
Enter the Unlock CODE you received from us.
Select OK
Your LG Neon is now unlocked!

LG GB250 FIDO

    1. Start the phone without a sim card
    2. Enter 2945#*71001#
    3. Select Unlock Sim
    4. Select Network Lock
    5. Select Yes to: "You are about to Sim Unlock your phone Continue"??
    6. Enter the Unlock CODE you received from us.
    7. Your phone is unlocked!!

LG Prime GS390

   1. Insert a not accepted SIM Card and turn ON your LG Prime GS390.

   2. Your LG Prime GS390 will display "phone restricted".

   3. Select Cancel

   4. Your LG Prime GS390 will display "phone restriction code".

   5. Enter the Unlock CODE you received from us.

   6. Select OK

   7. Your LG Prime GS390 is now unlocked!

LG CP150

Insert a not accepted SIM Card and turn ON your LG CP150.
Your LG CP150 will display "phone restricted".
Select Cancel
Your LG CP150 will display "phone restriction code".
Enter the Unlock CODE you received from us.
Select OK
Your LG CP150 is now unlocked!

LG GD330 / GT350

Insert a not accepted SIM Card and turn ON your LG phone.
Your LG GD330 will display "phone restricted".
Select Cancel
Your LG GD330/GT350 will display "phone restriction code".
Enter the Unlock CODE you received.
Select OK
Your LG phone is now unlocked!

Motorola

Power on phone with a non-original SIM card inserted
Enter unlock code when prompted
Your phone is unlocked

Warning!
If one of the followings messages appear
"Contact Service Provider"
"Tampert Alter"
"Wait before enter special Code"
"Contact Service"

Power on the phone and leave it for 40 minitues to 5 hours until you see the message "Enter Special Code"

Motorola 3G

If your phone is on a 3G network enter **057*
Then enter the unlock code into the window

Motorola CDMA & TDMA

Press 74663 # [Menu] [Menu] and you will be asked for a subsidy code
Enter the code you received from us.
Your phone is now unlocked

Motorola MPX

Switch ON your phone with a not allowed SIM card
If phone is asking for NETWORK PIN enter the NETWORK PIN we sent you
If phone is asking for SERVICE PROVIDER PIN. Enter the SERVICE PROVIDER PIN we sent you
Your phone is now unlocked

If phone is asking for NETWORK PUK

Power on the phone with the original card in and wait till phone is fully powered on and you have access to menu
Type * # * * 3 6 4 # and press green button
You will get a error message and after it your will see Engineering menu
Click Options
Click GSM Test
Select Send AT command
Now you will see a new window Saying "Send AT Command"
Type AT+CLCK="PN",0,"[SERVICE PROVIDER PIN or NETWORK PIN]" and press send
If you get Response "0 []" phone is unlocked
If you get 1 error, then make sure you have typed the code correct and try the other code

Switch your phone off, take battery out. Put battery back in. Power on the phone and leave it for 40 minitues to 5 hours until the message "Enter NETWORK PUK" is gone. Now enter the code received from us and 00000000 (eight zero's) as a new password.

If phone is asking for SERVICE PROVIDER PUK

Power on the phone with the original card in and wait till phone is fully powered on and you have access to menu
Type * # * * 3 6 4 # and press green button
You will get a error message and after it your will see Engineering menu
Click Options
Click GSM Test
Select Send AT command
Now you will see a new window Saying "Send AT Command"
Type AT+CLCK="PP",0,"[SERVICE PROVIDER PIN or NETWORK PIN]" and press send
If you get Response "0 []" phone is unlocked
If you get 1 error, then make sure you have typed the code correct and try the other code

If you do not have the original card or if the original card is not accepted because you flashed the phone with other firmware, then we can not help you.

NEC

NEC N342i

Power on phone without a SIM card
Compose **00012*CODE# where "CODE" is the unlock code you received from us.
Your cell phone is now unlocked

Other NEC models

Power on phone without a SIM card
Compose #7320*CODE# where "CODE" is the unlock code you received from us.
Your cell phone is now unlocked

Older NEC models

Power on phone without a SIM card
Compose #3210*CODE# where "CODE" is the unlock code you received from us.
Your cell phone is now unlocked

Nokia

All Nokia Models
-If your Nokia phone gives you a message saying "RESTRICTED", shut down your phone, remove the simcard, power on phone and perform the "CODE ENTRY" instructions below.

-If your phone doesn't say "RESTRICTED", make sure your phone has a simcard from any other provider (other the the one the phone is locked to) and perform the "CODE ENTRY" instructions below.

-If you entered a bad code too many times and get the error "NOT ALLOWED", then your counter is blocked and only a cable method will unlock your phone.

Power on phone without a SIM card
Compose #PW+CODE+1# where "CODE" is the unlock code you received from us.

* Use the * key to get the p, w, and + on Non-Smartphone Nokias.
* If you receive a code error after using this method, try once more like this #pw+code+7#.
P appears after pressing 3 times the button ( * )
W appears after pressing 4 times the button ( * )
+ appears after pressing 2 times the button ( * )

You will see a message "SIM Restriction Off"
Your cell phone is now unlocked

HTC, G1 (Google Android), MyTouch 3G, Pocket PC, XDA, Qtek, Dopod, i-Mate, XDA, etc

Power on phone with a non-original SIM card inserted
When prompted, enter unlock code you received from us.

Attention! Use the onscreen keyboard and make sure that wireless mode is OFF.

Your cell phone is now unlocked

ATTENTION: (For Google Android and MyTouch users)
If you need to sign up for a google account after unlocking the phone then click here for a video example.

T-Mobile MyTouch Activation

1. After you receive your unlock code from us, insert Non T-Mobile SIM card which you have planned to use with myTouch Phone.

2. Turn on your phone, a prompt for Enter Unlock Code will pop up, enter correct Unlock Codes
you have received from us. (Entering Wrong Unlock code more then Three time may permanently lock your phone)

3. After enter your code, return to Main Screen Menu and Access APN Settings.

4. A list of preset APN will be shown, you need to click on New APN button

5. Now Scroll down on New APN setting Screen and enter following details
MCC (Mobile Country Code), and MNC Mobile Network
Code
Here is a list of MCC code http://en.wikipedia.org/wiki/Mobile_network_code

6. After entering the setting, your GPRS / EDGE / 3G Data Service will be activated as per APN Setting .

7. Type Google User name / Password in Signing Window and this will Activate the Unlocked Device on your SIM Card.

Pantech

Power on phone with a non-original SIM card inserted
When prompted enter unlock code you received from us.

Attention! Use the onscreen keyboard and make sure that wireless mode is OFF.

Your cell phone is now unlocked

Pantech C150

Turn on phone with existing (original) SIM card
At main menu screen, enter *#865625#
When prompted, enter unlock code you received from us.

Sidekick / Hiptop

All models

Insert a non accepted SIM card and turn on the Sidekick
A dialogue screen will prompt you to enter the code:

Title: Special Code Required
Dialog: Enter code to enable SIM
Box for Code: 1-8 digits
Options: Enable or Cancel

On you having entered the code a dialogue box will come up saying Authenticating code

In case you see the “Waiting for Activation Screen”, hit the Menu key and the letter L key at the same time. The menu key is the top left key. By doing this, the waiting screen will go away and you will be able to make calls. For best results, hold down Menu and the L key until the Waiting for Activation screen disappears.

Your Sidekick/Hiptop cell phone is now unlocked

BenQ-Siemens

A56
1 - Switch ON your Siemens A56 with a NOT ACCEPTED SIM Card.
2 - Compose : *#0000*CODE#.

(OR)

1 - Switch ON your Siemens A56 with a NOT ACCEPTED SIM Card.
2 - Compose : *#0001*CODE#.Your cell phone is now unlocked

unlock U

Páginas

Code Entry Instructions